Davco Davelastic Eco

Weight 4L ,  20L
Color Milky White
SKU: Davco Admix 96-1-2 Category:
  • Environmentally friendly
  • Increased shear bond strength – when added to Davco’s cement-based adhesives
  • Increased tile bedding strength – especially for heavy stones and large format tiles
  • External facades application & heavy duty area

Davco Davelastic ECO is an environmentally friendly flexible polymer additives  suitable for fixing ceramic, tiles, marble & natural stones onto concrete, cement render, rendered brickwork surfaces or over existing tiles.

Surface Preparation
  • All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compound and any other loose or contaminating materials.
  • Expansion joints coinciding with joints in the substrate should be incorporated at the design stage at a maximum of 5m spacing and must be tiled over.
  • Movement joints must be incorporated where necessary in accordance with the general principles incorporated within the BS 5385: Part 1-4.
  • Dusty concrete or masonry should be swept clean and dampened with water prior to the application of mortar.
  • Painted surface must be scabbled / abraded to expose at least 80% of the original substrate. Newly rendered / screeded surface must be thoroughly cleaned prior to tilling and have a wood float finish.
  • Old rendered / screeded surface must be thoroughly cleaned prior to tilling and have a wood float finish.
  • New concrete must be allowed to cure for 6 weeks and have a wood float finish. Steel trowel finished concrete must be acid etched or mechanically abraded prior to tilling.
  • Old concrete surface must be thoroughly cleaned prior to tilling. Make sure all release agents are removed from concrete surfaces, especially on tilt-up slabs.
  • Screeds should be allowed to dry out as slowly aspracticable after curing to reduce the risk of curling.Cement and sand and fine concrete levelling screedsshould be cured for at least 7 days and be subjected to continuous air drying after curing for at least 2 weeks before the tiling is applied. Please refer to BS 5385 or MS1294.
  • To ensure screed/render level is plumb to achieve optimum adhesive bed thickness.
  • Certain non-absorbent/contaminated surfaces can easily be prepared for tiling via use of Davco Bonding Agent. Refer to Davco Bonding Agent data sheet for further details and suitability.Note: Do not soak ceramic tiles. Porcelain tiles with too much of release powders at back of tiles must be washed and clean well. Skim the back of the tiles to ensure optimum coverage. Prior to installation for external tiling, protect from direct hot sun and rain by means of shelter. It is the user’s responsibility to determine the condition and suitability of all surfaces prior to application
Additional Information
Weight 4L ,  20L
Color Milky White