Davco K11 Slurry 613 ECO

SKU: Davco K11 613 ECO Category: Brand:
Advantages
  • Environmentally friendly – Singapore Green Label certified
  • Protection against concrete carbonation and penetration
  • Nontoxic – suitable for drinking water
  • Non corrosive to steel or iron
  • Easy to mix and apply
Description

An environmentally friendly flexible two component acrylic modified cementitious waterproofing system. The two components of Davco K11 Slurry 613 ECO react chemically after mixing to form a hard and elastic film which bonds tenaciously to most concrete or masonry substrate to protect against possible ingress of water.

Surface Preparation
  • Clean the substrate of any protrusion or substances that may damage the membrane.
  • All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compound and any other loose or contaminating materials.
  • Dusty concrete or masonry should be swept clean and dampened with water prior to the application of mortar.
  • New concrete must be allowed to cure for 6 weeks and have a wood float finish. Steel trowel finished concrete must be acid etched or mechanically abraded prior to tilling.
  • Old concrete surface must be thoroughly cleaned prior to tilling. Make sure all release agents are removed from concrete surfaces, especially on tilt-up slabs.
  • Fill all voids, cracks, edges and angles with Lanko 702 or suitable repair material, so the surface is well prepared, sound, even and clean.
  • All outlet edges should be cut v-groove, filled with Lanko 702 and sealed with hydrophobic sealant.
Coverage
  • Ground moisture 1.5 kg / m2 / 2 coats
  • Water seepage with hydrostatic pressure 3.0 kg / m2 / 2 coats
  • Water seepage without hydrostatic pressure 2.0 kg / m2 / 2 coats
Additional Information
Weight 29KG/Set
Color -