Davco K11 613 HF

SKU: Davco K11 613 HF Category: Brand:
Advantages
  • Economical
    • Economical
    • Non-toxic & non corrosive to steel or iron
    • Highly flexible with good crack bridging capability
    • Protection against concrete carbonation and penetration
    • Easy to mix and apply
    • Impermeable
  • Non-toxic & non corrosive to steel or iron
  • Highly flexible with good crack bridging capability
  • Protection against concrete carbonation and penetration
  • Easy to mix and apply
  • Impermeable
Description

A highly flexible, two component cementitious waterproofing system. The two components designed with combination of polymeric micro compound, will react chemically after mixing to form a hard but highly elastic film which bonds tenaciously to most concrete or masonry substrate. Its quality and high content of synthetic resins enable the hardened layer of Davco K11 Slurry 613 HF to remains constantly flexible under all environmental conditions and completely waterproof up to 1.5 of waterhead pressure.

Surface Preparation
  • Clean the substrate of any protrusion or substances that may damage the membrane
  • All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compound and any other loose or contaminating materials.
  • Dusty concrete or masonry should be swept clean and dampened with water prior to the application of mortar.
  • New concrete must be allowed to cure for 6 weeks, with sufficient falls provided to avoid ponding on the finished membrane surface.
  • The salts from the reaction of acid etching must be thoroughly cleaned with pressure washing and allow the concrete to dry.
  • Old concrete surface must be thoroughly cleaned prior to application. Make sure all release agents are removed from concrete surfaces, especially on tilt-up slabs.
  • Fill all voids, cracks, edges, and angles with Lanko 702 or suitable repair material, so the surface is well prepared, sound, even and clean.
  • All outlet edges should be cut v-groove, filled with Lanko 702 and sealed with hydrophobic sealant.
Coverage
  • Ground moisture 1.5 kg / m2 / 2 coats
  • Water seepage with hydrostatic pressure 3.0 kg / m2 / 2 coats
  • Water seepage without hydrostatic pressure 2.0 kg / m2 / 2 coats
Additional Information
Weight 28KG/Set
Color -