Davco K555 Slurry

SKU: Davco K555 Slurry Category: Brand:
Advantages
  • Economical
  • Rigid waterproofing of water tanks, swimming pools etc.
  • Waterproofing of surface before laying marble to help prevent efflorescence
  • Sealing fine, hairline cracks in concrete structures not subjected to movement
  • Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
Description

A rigid, two component cementitious waterproofing system. The two components alkali reactive waterproofing product is based on alkali resistant synthetically modified cement.

Surface Preparation
  • Clean the substrate of any protrusion or substances that may damage the membrane
  • All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, wax, curing compound and any other loose or contaminating materials.
  • Dusty concrete or masonry should be swept clean and dampened with water prior to the application of mortar.
  • New concrete must be allowed to cure for 6 weeks, with sufficient falls provided to avoid ponding on the finished membrane surface.
  • The salts from the reaction of acid etching must be thoroughly cleaned with pressure washing and allow the concrete to dry.
  • Old concrete surface must be thoroughly cleaned prior to application. Make sure all release agents are removed from concrete surfaces, especially on tilt-up slabs.
  • Fill all voids, cracks, edges, and angles with Lanko 702 or suitable repair material, so the surface is well prepared, sound, even and clean.
  • All outlet edges should be cut v-groove, filled with Lanko 702 and sealed with hydrophobic sealant.
Coverage

2.5 – 3.0kg /m2 / 2 Coats

Additional Information
Weight 25KG/Set
Color -