Epoxy 271 (A/B)

Weight 5KG
Color Black, Chili Red, Light Grey, Dark Grey,
Ivory, Butter Beige, White
SKU: Epoxy 271 (A/B) Category: Brand:
Surface Preparation

• Ensure the tile surface has no residual film from adhesive setting material. Joint depth shall be at least 3 mm and the width 1mm to 3 mm.
• The use of a topical sealer or grout release applied to unglazed porcelain tile, abrasive, non-slip, rough textured tiles, porous tile or stone surfaces before grouting will facilitate cleaning. Alternatively, use masking tape to temporary seal the side surface of stones along the joint and work the grout into the joint without spreading to the unseal surface. Remove the tape once grouting completed to avoid staining.
• Test small area of tiles / stones for compatibility issue.
• Epoxy resins may affect the color of white or light colored porous stones (such as white carrara, thusos white, royal danby, etc.).
• Make sure tile surface and open grout joints are clean, and free from debris, existing grouts, grout spacers or standing water.
• Surface temperature range for installation must be above 4°C and less than 35°C.

Coverage

Approximately 1.5 – 2.5 kg / m2 using a 3mm x 3mm notched trowel
Approximately 3.0 – 4.0 kg / m2 using a 6mm x 6mm notched trowel
Approximately 7.0 – 8.0 kg / m2 using a 12mm x 12mm notched trowel

Additional Information
Weight 5KG
Color Black, Chili Red, Light Grey, Dark Grey,
Ivory, Butter Beige, White